Lighting bulb via wireless power

Lighting bulb via wireless power

Wireless electricity or wireless power transmission is one of the emerging technologies today. The idea of this technology is transmitting power from a source to any receiver using the free space, same as the  TV and  radio transmission or same as your wireless lan or WIFI. Some of the uses as of the moment are for  charging iPod, cellphones, digital cameras, mp3, iPhone and other electronic devices.

Materials:

A. Source---5V sine wave or square wave source @135kHz frequency

              *555 IC square wave signal generator is a candidate see more

               on  555 timer IC

B. C2----940nF cap or parallel 2 470nF Mylar or ceramic capacitor

C. L2----1.46uH air coil inductor or 15m  #24AWG magnetic wound

               @ 2 inches diameter

D. L1---100 turns #20AWG magnetic wire @ 2 inches diameter or larger

working:

1. Source coil powered by a main supply usually your power outlet

2.Yellow line is  the energy flow from the source that is receiving coil

3.Conducting material that blocks some transmitted energies (blue line)

4.The receiving coil that is connected to the device like your cellphones, iPods, mp3, and others.

Resonant Frequency:

To achieve better wireless power transmission, the Power source must be of the same frequency of receiving coil.

Power source frequency F1 = Receiving coil frequency F2

F1=F2=  1/(2π√(L2*C2))

         *for  more LC frequency balancing use LC frequency calculator

Automatic rain operated wiper

Automatic rain operated wiper


The battery supplies the power to the sensor as well as rain operated motor. Wiper
motor is automatically ON during the time of rainfall. The senor is fixed in the vehicle
glass. The conductive (Touch) sensor is used in this project. It senses the rainfall and
giving control signal to the control unit. The control unit activates the wiper motor
automatically. This operation is called “Automatic rain operated wiper”.

ADVANTAGES

1. Low cost automation project.

2. Free from wear adjustment.

3. Less power consumption

4. Operating Principle is very easy.

5. Installation is simplified very much.

6. To avoid other burnable interactions viz.… (Diaphragm) is not

used.

7. It is possible to operate Manually/automatically by proving

On/Off switch.

8. Sensor cost is very low due to conductive sensor

DISADVANTAGES

1. This system applied in the case of water falling on the class only.
2. Addition cost is required to install this system to four wheeler.

Discrete-time signals

Discrete-timesignals

A discrete-time signal is a sequence or a series of signal values defined in

discrete points of time, see Figure 1. These discrete points of time can be

denoted tk where k is an integer time index. The distance in time between

each point of time is the time-step, which can be denoted h. Thus,

h = tk − tk−1 (1)

The time series can be written in various ways:

{x(tk)} = {x(kh)} = {x(k)} = x(0), x(1), x(2), . . . (2)

To make the notation simple, we can write the signal as x(tk) or x(k).

Examples of discrete-time signals are logged measurements, the input signal to and the output signal from a signal filter, the control signal to a physical

process controlled by a computer, and the simulated response for a dynamic

system.

Piezoelectricity

Piezoelectricity is the charge which accumulates in certain solid materials (notably crystals, certain ceramics, and biological matter such as bone, DNA and various proteins) in response to applied mechanical strain. The word piezoelectricity means electricity resulting from pressure. It is derived from the Greek piezo or piezein, which means to squeeze or press, and electric or electron, which stands for amber, an ancient source of electric charge. Piezoelectricity is the direct result of the piezoelectric effect.

The piezoelectric effect is understood as the linear electromechanical interaction between the mechanical and the electrical state in crystalline materials with no inversion symmetry. The piezoelectric effect is a reversible process in that materials exhibiting the direct piezoelectric effect (the internal generation of electrical charge resulting from an applied mechanical force) also exhibit the reverse piezoelectric effect (the internal generation of a mechanical force resulting from an applied electrical field). For example, lead zirconate titanate crystals will generate measurable piezoelectricity when their static structure is deformed by about 0.1% of the original dimension. Conversely, those same crystals will change about 0.1% of their static dimension when an external electric field is applied to the material.

Piezoelectricity is found in useful applications such as the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, and ultrafine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, the scanning probe microscopies such as STM, AFM, MTA, SNOM, etc., and everyday uses such as acting as the ignition source for cigarette lighters and push-start propane barbecues.